Get Command¶

Get the details of a command.

Request Format¶

GET https://{apigw-address}/connect-service/v2.1/commands?action=get

Request Parameters (URI)¶

Note

Use one of the following methods to specify the device:

Include assetId in the request
Include productKey + deviceKey in the request

Name	Location (Path/Query)	Mandatory/Optional	Data Type	Description
orgId	Query	Mandatory	String	The organization ID which the asset belongs to. How to get orgId>>
assetId	Query	Optional (See Note above)	String	The asset ID. How to get assetId>>
productKey	Query	Optional (See Note above)	String	The product key. To be used with `deviceKey`.
deviceKey	Query	Optional (See Note above)	String	The device key. To be used with `productKey`.
commandId	Query	Mandatory	String	The command ID.

Response Parameters¶

Name	Data Type	Description
data	Command Struct	The details of the command. For details, see Command Struct.

Command Struct ¶

Name	Data Type	Description
commandId	String	The command ID.
orgId	String	The organization ID which the asset belongs to.
productKey	String	The product key.
deviceKey	String	The device key.
assetId	String	The asset ID.
createTime	String	The time when the command was invoked.
createLocaltime	String	The local time when the command was invoked.
commandType	Integer	The command type. 1 = Measurement point setting 2 = Service invocation
commandName	StringI18n	The command name. Refers to the measurement point name for measurement point setting. Refers to the service name for service invocation.
timeout	Integer	The command timeout duration. Its unit is seconds and its range is [1-60]. The default value is 30.
pendingTtl	Long	The command cache duration. Its unit is seconds and its range is [ 0 - 48 * 60 * 60 ], which is 0 by default. If the pendingTtl is 0, it indicates that the commands will be executed immediately.
state	Integer	The command status, which is represented by an integer from 1-7. 1 = Created 2 = Canceled 3 = Expired 4 = Released 5 = Send successfully 6 = Failed 7 - Response timed out
tslIdentifier	String	The corresponding identifier in the `ThingModel`. Refers to the measurement point identifier for measurement point setting. Refers to the service identifier for service invocation.
inputData	Map (Key is of String type and the Value is of String, Number, Array or Object type)	The input data. For measurement point setting commands, the key is the measurement point identifier and the value is the measurement point value to be set. For service invocation commands, the key is the service input parameter identifier. The value data type will be as per defined in the `ThingModel`.
outputData	Map (Key is of String type and the Value is of String, Number, Array or Object type)	The output data. No return value is provided for this field for measurement point setting commands. For service invocation commands, this will return the service output results. The value data type will be as per defined in the `ThingModel`.

Error Codes¶

Code	Description
11404	The `commandId` cannot be found or does not exist.
11810	The command can not be encoded into the product-customized format when the product supports custom data formats.
11888	The device is not activated and the instant command cannot be sent.
11900	The device is offline and the instant command cannot be sent.
11902	The number of cached commands reached the upper limit.
11904	The command is not sent, and the instant command timed out.
11915	The command is sent, but the response timed out.

Samples¶

Request Sample¶

url: https://{apigw-address}/connect-service/v2.1/commands?action=get&deviceKey=yourDeviceKey&productKey=yourProductKey&commandId= yourCommandId&orgId=yourOrgId
method: GET

Return Sample¶

{
    "code": 0,
    "msg": "OK",
    "requestId": "7d863d517eae4f18a2776452eb1305bb",
    "data": {
        "commandId": "2242591201245044736",
        "orgId": "yourOrgId",
        "productKey": "yourProductKey",
        "deviceKey": "yourDeviceKey",
        "assetId": "yourAssetId",
        "createTime": "15910899018",
        "createLocalTime": "2020-06-02 17:25:01",
        "commandType": 2,
        "commandName": {
            "defaultValue": "",
            "i18nValue": {
                "en_US": "test_service"
            }
        },
        "timeout": 30,
        "pendingTtl": 1000,
        "state": 2,

        "tslIdentifier": "test_service",
        "inputData": {
            "parameter_1": 1.3,
            "parameter_2": 13
        },
        "outputData": null
    }
}

Java SDK Sample¶

package com.envisioniot.enos.api.sample.connect_service.command;

import com.envision.apim.poseidon.config.PConfig;
import com.envision.apim.poseidon.core.Poseidon;
import com.envisioniot.enos.connect_service.v2_1.service.GetCommandRequest;
import com.envisioniot.enos.connect_service.v2_1.service.GetCommandResponse;

public class GetCommand {

    public static void main(String[] args) {
        String appKey = "yourAppKey";
        String appSecret = "yourAppSecret";
        String serverUrl = "yourServerUrl";

        String orgId = "yourOrgId";
        String productKey = "yourProductKey";
        String deviceKey = "yourDeviceKey";
        String commandId = "yourCommandId";

        GetCommandRequest request = new GetCommandRequest();
        request.setOrgId(orgId);
        request.setProductKey(productKey);
        request.setDeviceKey(deviceKey);
        request.setCommandId(commandId);
        GetCommandResponse response = Poseidon.config(PConfig.init().appKey(appKey).appSecret(appSecret).debug())
                .url(serverUrl)
                .getResponse(request, GetCommandResponse.class);
    }
}