• Documentation
• Onboarding a Solar Site and a Weather Station to EnOS

Onboarding a Solar Site and a Weather Station to EnOS

This tutorial uses the example of a solar site and its internal weather station device to introduce how to use EnOS Onboarding Tool to connect sites and devices to EnOS Cloud via an EnOS Edge gateway.

Scenario

In solar sites, monitoring weather conditions is a common business scenario. Weather stations provide real-time readings of meteorological parameters such as temperature, humidity, wind speed, wind direction, rainfall, air pressure, and radiation at the site in real time. For solar sites, meteorological data provides important information for power forecasting, daily maintenance, and alarm overhaul, and is one of the guarantors of maximum power generation and revenue of Solar projects.

Connecting the the weather devices to EnOS Cloud via EnOS Edge gateway is a convenient way to send instructions and control status to the devices remotely. Unattended, meteorological parameters can be sent directly to EnOS Cloud for display, storage, analysis and alerting through EnOS Industry Application Common Building Blocks to ensure the efficient operation of solar sites.

Tutorial Objectives

This tutorial enables you to:

• Onboard a solar site, a weather station via an EnOS Edge gateway using EnOS Onboarding Tool.

• Build the topologies of the site and its devices.

• Configure the connection of the devices and EnOS Edge.

• Map the measurement points of the devices to the measurement points of the EnOS models.

Prerequisites

• The operations in this tutorial use Site Onboarding menu. Therefore, ensure that the account has access to this menu. Contact the application administrator if needed.

• Onboarding Tool allows you to assign permissions to different roles for the different steps of Site Onboarding. This tutorial assumes that the onboarding process is performed entirely by the same role. Therefore, ensure that the account role has operation permissions for all processes on Site Onboarding. If necessary, contact the application administrator to obtain operation permissions. For more information, see Assigning Onboarding Process.

• Ensure that the current OU can create solar sites, weather station devices, and EnOS Edge gateway devices, and ensure that the associated business objects are assigned the appropriate model, manufacturer, and model. Contact your system administrator if necessary.

• Ensure that topology rules are in place that allow weather station devices to be assigned in solar sites. Contact your system administrator if necessary.

This tutorial uses EnOS public models to onboard assets. The assets to be onboarded and the models to be associated are as follows.

Asset Name	Model Name	Model ID	Manufacturer	Model No.
Solar-Site	Solar Site	EnOS_Solar_Site	/	/
Solar-WeatherStation	Weather Station	EnOS_Solar_WeatherStation	WST_ManufacturerSimulation	WST_ModelSimulation
Solar-Edge	EnOS_Edge_Standard_Model	EnOS_Edge_Standard_Model	Univers	EnDTU-A

This tutorial teaches you to build the topologies in a solar site. The configuration information of the topology rules used is as follows.

Attribute	Configuration Information
Topology Rule Name	Solar-Weather Station Topology
Generate standalone asset tree	No
Root Node Object	Site Type > Solar
Topology Object Constraints	Other Object > Weather Station

Step 1: Configuring a Site

Site Onboarding menu page displays the list of established sites, and you can create new sites on this page. For more information, see Configuring Sites.

Follow the steps below to create a solar site.

1. Log in to EnOS Application Portal, and select Onboarding Tool.

2. In the left navigation bar, select Site Onboarding menu, and then select Solar Site tab.

3. Select New Site to go to Configure Site step page.

4. After entering the following information, select Save.

   • Name: Solar-Site

   • Longitude: 116.5

   • Latitude: 22.5

   • Time Zone: UTC + 08:00

   • Capacity: 30

Click Save and then Next in the lower right corner to go to Configure Devices step.

Step 2: Configuring Devices

Configure Devices page displays the created devices, components, and groups, and you can create new devices, components, and groups on this page. For more information, see Configuring Devices.

In the following operations, you will create a weather station device and an EnOS Edge gateway device within the solar site.

Configuring a Weather Station Device

1. Go to Configure Devices step, and select New Device/Component on Device/Component tab.

2. In the pop-up, select in the following information:

   • Type: Weather Station

   • Manufacturer: WST_ManufacturerSimulation

   • Model No.: WST_ModelSimulation

3. Depending on the manufacturer and model, the linked model EnOS_Solar_WeatherStation will be displayed automatically. Select Submit to be redirected to the device details page.

   
   

   

   
   

4. On the device details page, enter the basic information about the weather station device:

   • Name: Solar-WeatherStation

   • Calculation Method for Daily Radiation: Integration

5. When finished, select Save to complete creation of the weather station device.

Configuring an EnOS Edge Device

1. In Configure Devices page, select New Device/Component on Device/Component tab.

2. In the pop-up, select in the following information:

   • Type: Edge

   • Device Subtype: Cloud Edge

   • Manufacturer: Univers

   • Model No.: EnDTU-A

   
   

   

   
   

3. Depending on the manufacturer and model, the associated model EnOS_Edge_Standard_Model will be displayed automatically. After clicking Submit, enter the basic information about the EnOS Edge device on the details page:

   • Data Source: Manual entry

   • Name: Solar-Edge

   • Edge Type: EdgeGateway

4. Select Save to finish creating the EnOS Edge Gateway device.

Select Next in the lower right corner to enter Build Topology step.

Step 3: Building a Topology

In Build Topology page, you can build the hierarchical relationship between sites and devices by assigning them to topology nodes. The assigned asset will automatically be added the tags of the topology tree. For more information, see Building Topology.

Through the following operations, you will build a topology with the solar site assigned to the root node and the weather station device assigned to the child node.

1. Go to Build Topology page, and in the list of topology rules on the left, select the Solar-WeatherStation Topology topology rule. For more information on topology rules, see Topology Rule.

2. Under the topological rules with solar-type site as the root node object, a topology will automatically created with its root node where Solar-Site is automatically assigned. If not, follow the steps below to create a topology manually.

   1. Click Create Topology and enter Topology Name with Solar-WeatherStation Topology.

      
      

      

      
      

   2. Click Next to select Solar-Site to assign to the root node.

      
      

      

      
      

   3. Click OK to complete the creation.

3. Select Add Child Node on the root node.

   
   

   

   
   

4. In the pop-up, select in the following information:

   • Object Type: Device

   • Type: Weather Station

   • Object: Solar-WeatherStation

     
     

     

     
     

5. Select OK to complete the addition of the weather station child node.

Select Next in the lower right corner to go to Configure Connections step.

Step 4: Configuring Connections

Configuring connections means establishing a connection through the EnOS Edge gateway device, assigning devices to the connection, and then connecting the EnOS Edge gateway device to EnOS Cloud. Once connected, the device’s data will be uploaded to EnOS Cloud through the EnOS Edge gateway device. For more information, see Configuring Connections.

Follow the steps below to connect the weather station device to EnOS Cloud through the EnOS Edge gateway device.

Creating an EnOS Edge Connection

1. Configure Connection page shows 1 device and 1 Edge.

2. Select + New to create an EnOS Edge connection.

   
   

   

   
   

3. Available connection methods include Direct, Tunneling, SFTP/FTP, and API. Select Tunneling and select Submit.

   
   

   

   
   

4. Enter the following information:

   • Connection Name: Connection 1

   • Interface: Ethernet

   • Method: TCP/IP

   • Operation Mode: Client

   • IP Address: 255.255.255.255: 443

   • Protocol Type: IEC104

5. After selection, the protocol column will display Protocol recommended by the system. Select Edit to modify the recommended value. This tutorial uses the IEC104-Client-IEC104 protocol.

   
   

   

   
   

6. Select Submit to finish configuring the EnOS Edge connection.

Allocating Devices to the Connection

1. After selecting Submit, in Assign Devices pop-up that appears, select Solar-WeatherStation device.

   
   

   

   
   

2. Select Submit to finish assigning the weather station device to Connection 1.

The page now displays Connection 1 and 1 Assigned Devices.

Connecting EnOS Edge with EnOS Cloud

On Configure Connection page, for Connection 1, select Download option, and then select Download Configuration File, and give the configuration file to EnOS system administrator for offline deployment.

You can view the status of the EnOS Edge device and its connection with EnOS Cloud on the current page. At present, the EnOS Edge device is in To Publish state, and is in Unconnected status.

Select Next in the lower right corner to enter Mapping Points step.

Step 5: Mapping Points

Mapping measurement points means to map the source measurement points of the weather station device to the measuring points of EnOS Cloud models. By importing the source point table and configuring the logical addresses and offsets, the measurement point mapping is realized. After mapping, EnOS Cloud will be able to produce accurate analysis, real-time alarms, and forecasts fsrom the data uploaded by the device. For more information, see Mapping Points.

Importing a Point List

When importing a point table, you can select one of two import methods: All-Models Point List and Single-Models Point List. Follow the steps below to import the device source points using the single-models point list.

1. On Mapping Points step, and then under the Single-Models Point List, select Import Point List.

2. Click + to add a list. In the pop-up, select in the following information:

   • Device Type: Weather Station

   • Model: WST_ModelSimulation

   • Protocol: IEC104-Client-IEC104

   • Measurement Point Type: AI and DI

     
     

     

     
     

3. Select Download Template to download the single-models point list template, enter the following source point data in the template, upload the point list, and select OK.

Source Point Name	Source Point Number	Value Type	Point Type	Model Point Identifier
Environment Temperature	1	DOUBLE	AI	WST.Temperature
Environment Humidity	2	DOUBLE	AI	WST.Humidity
Wind Speed	3	DOUBLE	AI	WST.WindSpeed
Wind Direction	4	DOUBLE	AI	WST.WindDirection
Cumulative Rainfall	5	DOUBLE	AI	WST.Rainfall
Atmospheric Pressure	6	DOUBLE	AI	WST.Pressure
POA	7	DOUBLE	AI	WST.Radiation
Weather Station State	8	INT	DI	WST.State

After importing the point table, click Submit and you will see the imported point table on Mapping Points page.

Since the source measurement points of the device imported in this tutorial correspond perfectly to the measurement points of the model, there is no need to configure logical addresses and offsets. If required, click Configure . For more information, see Configuring Logical Addresses and Offsets.

Mapping Points Automatically

There are three methods to map measurement points, Auto Map, Formula Mapping and Manual Map, You can choose the appropriate mapping method based on your needs. Through the steps below, you will complete measurement point mapping through automatic mapping.

1. Select the imported point table on Map Points step page to enter the measurement point details page.

2. Select Auto Mapping to start automatic mapping of measurement points. The source measurement points of the device imported in this tutorial correspond perfectly to the measurement points of the model, so the system automatically completes the mapping.

   
   

   

   
   

3. On Mapped tab, a list of mapped measurement points is displayed. If required, click the measurement point name in Model Measurement Points column in the list to enter the manual mapping page and select other model measurement points for the source measurement points.

   
   

   

   
   

Publishing Points

On Map Points page, select Publish to complete the mapping of measuring points.

Step 6: Submitting the Site

1. On Map Points page, select Submit.

2. If you need to notify other users, you can enter the email address to be notified in the pop-up. If not needed, continue to select Submit in the pop-up to complete site onboarding.

The status of the solar site is updated to Released. For more information, see Submitting Sites.

Note

After the status of the site is updated to Released, users will not be able to edit any information on the site. Only super administrators can edit onboarded sites.

Results

• In the site list on Onboarding Tool > Site Onboarding page, you can view detailed information about Solar-Site.

• On Onboarding Tool > Device Setting page, all created devices are displayed in the list, and you can add other business information for the device. For more information, see Setting Device Business Information.