What’s New in Greenwich

Greenwich is committed to satisfying customer needs, improving user experience, and optimizing functionalities in the platform for more intelligent and enjoyable design.

In the latest versions, the following functions have been updated:

Version No. Module Function Details
7.1.0 Turbine library Optimize the tower template in turbine library for future tower customization. Configuring Turbine Model Series
  Turbine library Add the Octave type of noise curve. Configuring Operation Mode
  AEP calculation Support the output of AEP check list in mesoscale AEP calculation. Calculating AEP - Mesoscale
  Reliability prediction In the detail result table of reliability prediction, highlight the overloaded turbine locations. Checking Calculation Results
7.2.0 Mast During wind direction repair, synchronized the calculation of correlation as by wind direction. Mast Data Repair
  Public data In the downloaded wind resource map, the upper limit of the exterior rectangle area is 2000 km2. Creating a Terrain or Roughness Map based on Polygon
7.3.0 AEP Add multi-operation mode AEP calculation function AEP Calculation
  Noise calculation Support setting hourly multiple operation mode. Automatch ground factor. Enable to display noise map and noise receiving points of different time. Noise Calculation
  Economic Evaluation Update economic evaluation Economic Evaluation
  Project menu Add project scheme management function Managing Project Scheme
7.4.0 Micrositing report Report UI and Content optimization. Support bilingual version. Mirositing report
  Tower check and optimization Support check and optimize tower on turbine configuration page. Configuring Turbine Property
7.5.0 Planning and Siting Add running mode optimization function Running Mode Optimization
7.6.0 Applicability Analysis Add applicability analysis Applicability Analysis
8.0.0 Data layer Observation points layer supports mast details comparison Data Layers
8.1.0 Economic Evaluation Update economic evaluation export report Economic Evaluation
8.2.0 Device Library Add PV module and inverter library PV Module and Inverter Library
  Data Layer Add PV Cost Layer Add PV Cost Layer
  PV Resource Accessment Add Importing PV Module Import PV Module
8.3.0 PV Resource Accessment Add PV Layout Optimization PV Layout Optimization
  Information Demonstration Area Add Solar Resource Detail Solar Resource Detail
  CFD Model Add AI modified model result CFD Model
8.4.0 Applicability Analysis Add load AI mode to aerodynamic calculation Applicability Analysis
8.5.0 Load Optimization Support load AI mode of complex mountain Load Optimization
  WRA Support Calculation of the distance between turbine and road Calculation of Distance between Turbine and Road
8.6.0 Economic Evaluation Support monthly economic evaluation Economic Evaluation

In this chapter, only main functions updated in the latest 13 releases of Greenwich are listed. For more updates in earlier releases, refer to the section Release Notes.